Dell 3115CN manual Ipx/Spx

Dell Printer Configuration Web Tool Page 30 of 40

WINS*		1		WINS Mode		Select the check box to get the WINS server address automatically from the DHCP server.
				WINS Primary Server		Sets WINS server address in the nnn.nnn.nnn.nnn format. Each section of nnn.nnn.nnn.nnn is a value between
						0 and 254. Note that values 127 and 224-254 are not valid for the first three-digits.
				WINS Secondary Server		Sets a back up WINS server address in the nnn.nnn.nnn.nnn format. Each section of nnn.nnn.nnn.nnn is a
						value between 0 and 254. Note that values 127 and 224-254 are not valid for the first three-digits.
LPD				Connection Time-Out		Sets the connection timeout period from 1 to 1000 seconds.
				IP Filter (IPv4)		To set the IP Filter settings, click IP Filter. The IP Filter page is displayed.
Port9100				Port		Sets the port number from 9000 to 9999.
				Number
				Connection Time-Out		Sets the connection timeout period between 1 and 1000 seconds.
				IP Filter (IPv4)		To set the IP Filter settings, click IP Filter. The IP Filter page is displayed.
IPP*	1			Printer URI		Displays the printer URI.
				Connection Time-Out		Sets the connection timeout period from 1 to 1000 seconds.
				Port Number		Displays the port number for receiving requests from the client.
				Maximum Sessions		Displays the maximum number of connections received simultaneously by the client.
WSD				Port Number		Sets the port number from 8000 to 9999.
				Receive Time-Out		Sets the receive timeout period from 1 to 65535 seconds.
				Notification Time-Out		Sets the notification timeout period from 1 to 60 seconds.
				Maximum Number of TTL		Sets the maximum number of TTL from 1 to 10.
				Maximum Number of Notification		Sets the maximum number of notifications from 10 to 20.
HTTP				Port Number		Sets the port number to 80 or from 8000 to 9999.
				Simultaneous Connections		Displays the maximum number of connections received simultaneously by the client.
				Connection Time-Out		Sets the connection timeout period from 1 to 255 seconds.
FTP				Password		Sets whether to enable or disable the password. And also specifies the password value up to 7 characters.
				Connection Time-Out		Sets the connection timeout period from 1 to 1000 seconds.
IP Filter				Address		Sets the address in the address field. Enter a numeric value between 0 and 255 in each field of
(IPv4)*			2			"aaa.bbb.ccc.ddd." However, 127 and 224-254 cannot be used to "aaa."
				Address Mask		Sets the Subnet Mask in the Mask field. Enter a numeric value between 0 and 255 in each field.
				Active	Reject	Rejects printing from specified network address.
				Mode
					Permit	Permits printing from specified network address.
					Disabled	Disables the IP Filter feature for the specified IP address.

*1 An optional multi-protocol card is required to display the item.

*2 This item is only available for LPD or Port9100.

NetWare

Purpose:

To configure detailed settings for IPX/SPX and NetWare.

Values:

IPX/SPX	Frame	Auto	Specifies the active frame type automatically.
Settings	Type
		Ethernet II	Selects Ethernet II frame type.
		Ethernet 802.3	Selects IEEE802.3 frame type.
		Ethernet 802.2	Selects IEEE802.2 frame type.
		Ethernet SNAP	Selects SNAP (Sub Network Access Protocol) frame type.
	Current Frame Type		Displays the current frame type.
	Network Address		Displays the IPX network address.
NetWare	Device Name*1		Specifies the printer name up to 47 alphanumeric characters.
			For PServer Mode, set the Print Server Name (Print Server Object Name). The original setting remains valid if no input
			is made.
	Active	Directory:	Selects this option when using in Directory: PServer Mode.
	Mode	PServer Mode

mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch... 2/29/2012