Networking

Page 7 of 8

￿Static Addressing: TCP/IP address is assigned manually by the system administrator.

￿Dynamic Addressing BOOTP/DHCP(default): TCP/IP address is assigned automatically by a DHCP or BOOTP server on your network.

Static Addressing

To enter the TCP/IP address from your multifunction printer's operator panel, take the following steps:

1.Press until >SETUP appears, and then press .

2.Press until >Admin Menu appears, and then press .

3.Press until >Wired Net or >Wireless Net appears, and then press

4.Press until >TCP/IP appears, and then press

5.Press until >IP Address appears, and then press .

An IP address consists of 4 bytes.

IP Address

* 0. 0. 0. 0.

Enter a number between 0 and 255 for each octet.

6.Enter the numbers from the keypad, and then press .

7.Repeat 5 to complete the address from the 1st byte to the 4th byte.

8.Repeat 5 through step 8 to configure the other TCP/IP parameters.

Dynamic Addressing (BOOTP/DHCP)

To assign the TCP/IP address automatically using a DHCP or BOOTP server on your network, take the following steps:

1.Press until >SETUP appears, and then press .

2.Press until >Admin Menu appears, and then press .

3.Press until >Wired Net or >Wireless Net appears, and then press

4.Press until >TCP/IP appears, and then press

5.Press until >DHCP or >BOOTP appears, and then press .

mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch... 2/29/2012

Page 263
Image 263
Dell 3115CN manual Static Addressing, Dynamic Addressing BOOTP/DHCP