Adjusting Color Registration
To adjust the color registration when you first install the multifunction printer or after moving it to a new
location, follow the procedure below. See "Operator Panel" and "Color Reg Adjust" for information about the
operator panel.

Printing the Color Registration Chart

Use the operator panel to print the color registration chart.
1. Press until >SETUP appears, and then press .
2. Press until >Admin Menu appears, and then press .
3. Press until >Maintenance appears, and then press
4. Press until >Color Reg Adjust appears, and then press
5. Press until >ColorRegi Chart appears, and then press .
The color registration chart is printed.

Determining Values

From the lines to the right of the Y (Yellow), M (Magenta), and C (Cyan) pattern, find the values of the
straightest lines.
NOTE: You can also use the densest colors of the lattice pattern to find the straightest lines. The colors
printed at the highest density are those next to the straightest lines. When 0 is the value nearest the
straightest line, you do not need to adjust the color registration. When the value is not 0, follow the
procedure outlined in "Entering Values".
Page
21
of
24
Maintaining Your Multifunction Printer
2/
29/
2012
...