3. Adjust the document resolution, referring to "Adjusting the Document Resolution".
4. Close the document cover.
Adjusting the Document Resolution
Use the Document Resolution setting to improve the output quality of the original or if scanning photographic materials.
1. Press until >FAX appears, and then press .
2. Press until >Resolution appears.
3. Press to select the desired setting, and then press .
Original Type
The Original Type setting is used to improve the image quality by selecting the document type for the current fax job.
To select the image quality:
1. Load the document to be faxed on the document feeder glass, and close the cover.
2. Press until >FAX appears, and then press .
3. Press until >Original Type appears.
4. Press to select the desired setting, and then press .
5. Press Start to begin faxing.
Lighter/Darker
Adjust the contrast to make the fax lighter or darker than the original.
To adjust the contrast:
1. Load the document to be faxed on the document feeder glass, and close the cover.
NOTE: If you are faxing a page from a book or magazine, lift the cover until its hinges are caught by the stopper and then close the cover. If the
book or magazine is thicker than 30 mm, start faxing with the cover open.
Standard Uses for documents with normal sized characters.
Fine Uses for documents containing small characters or thin lines or documents printed using a dot-matrix printer.
Super
Fine
Uses for documents containing extremely fine detail. The super fine mode is enabled only if the remote printer also supports the
Super Fine resolution. See the note below.
NOTE:Faxes scanned in the Super Fine resolution transmits at the highest resolution supported by the receiving device.
Text&Photo Uses for documents with both text and photo/gray tones.
Photo Uses for documents with photo or gray tones.
Text* Uses for documents with text.
Page
9
of
20
Faxing
2/
29/
2012
...