5. Insert the two screws through the control board case and into the Multi-Protocol Card as shown, and tighten the screws.
6. Close the control board cover and turn the screw clockwise.
Confirming the Installation of the Multi-Protocol Card
1. Print a printer settings page to verify that the optional multi-protocol card is installed correctly.
a. Press until>SETUP appears, and then press .
b. Press until >Reports appears, and then press .
c. System Settings is displayed. Press .
The system settings page is printed.
d. Verify Multi-Protocol Card is listed in the system settings under Printer Options.
If it is not listed, turn off the multifunction printer, unplug the power cable, and reinstall the optional multi-protocol card.
Installing the Dell Wireless Printer Adapter 3310 USB
Connectivity Technology Wireless
Compliant Standards 802.11b/802.11g
Bandwidth 2.4GHz
Data Transfer Rate 11g mode: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
11b mode: 11, 5.5, 2, 1 Mbps
Device Type Wireless Printer Adapter
Page
16
of
48
Installing Optional Modules
2/
29/
2012
...