iii. Select Permit.
iv. Click Apply New Settings.
b. Disabling Printing From a Specified User
The following describes the procedure to disable printing only from the "192.168.100.10" IP address.
Procedures:
i. Click the first column of Access List row 1.
ii. Enter "192.168.100.10" in the Address field and "255.255.255.255" in the Address Mask field.
iii. Select Reject.
iv. Click the first column of Access List row 2.
v. Enter "0.0.0.0" in the Address field and "0.0.0.0" in the Address Mask field.
vi. Select Permit.
vii. Click Apply New Settings.
c. Enabling and Disabling Printing from Network Addresses
You can enable printing from the "192.168" network address and disable printing from the "192.168.200" network address. However, the example below describes how
to enable printing from the "192.168.200.10" IP address.
Procedures:
i. Click the first column of the Access List row 1.
ii. Enter "192.168.200.10" in the Address field and "255.255.255.255" in the Address Mask field.
iii. Select Permit.
iv. Click the first column of the Access List row 2.
v. Enter "192.168.200.0" in the Address field and "255.255.255.0" in the Address Mask field.
vi. Select Reject.
vii. Click the first column of the Access List row 3.
viii. Enter "192.168.0.0" in the Address field and "255.255.0.0" in the Address Mask field.
ix. Select Permit.
x. Click Apply New Settings.
Other Features
The Other Features tab includes Set Password, Security, IPsec andReset Print Server pages.
Set Password
Purpose:
To set or change the password that is required to access the printer setup parameters from the Dell Printer Configuration Web Tool.
Set the password of the operator panel fromPanel Settings in the Printer Settings. This page can also be displayed by clicking Set Password in the Left Frame.
Values:
Security
Purpose:
To specify the settings for the SSL encryption communication to the multifunction printer.
Values:
NOTE:To restore the password to default (NULL), initialize the non-volatile memory (NVM).
Administrator Password Sets the password up to 10 alphanumeric characters. The password will appear as asterisks (*) in the field when it is entered.
Confirm Administrator Password Enter the password again to confirm it.
HTTPS Displays the port status.
Port Number Specifies the port number, which is not identical with that of HTTP for TCP/IP. This must be 443 or between 8000 and 9999.
Time Zone Set the correct Time Zone to generate SSL authorization. The initial value, 0 or -5 (hours)*1, is set.
Generate Self-Signed Certificate Click to display Generate Self-Signed Certificate page and to create a security certification from the page.
*1 Initial values may vary for different countries.
NOTE:An optional multi-protocol card is required to display the Security page.
Page
34
of
40
Dell Printer Configuration Web Tool
2/
29/
2012
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch
...