Faxing | Page 8 of 20 |
2.Press the 
button until Parameter appears, then press the 
button.
3.Press the 
button until FAX Parameter appears, then press the 
button.
4.Press the 
button until G3M RX Coding appears, then press the 
button.
5.Press the 
button until MMR appears, then press the 
button to enable MMR encoding, select MR to enable MR encoding, or select MH to enable MH encoding.
Sending a Fax
You can fax data from you multifunction printer. Also you can directly fax data transferred from the computer running Windows.
Loading an Original Document
You can use the ADF or the document feeder glass to load an original document for faxing. Using the ADF, you can load up to 50 sheets of 75 g/m2 (20 lb) paper at a time. Using the document feeder glass, you can load one sheet at a time.
NOTE: Ensure that no document is in the ADF. If any document is detected in the ADF, it has priority over the document on the document feeder glass.
NOTE: To get the best scan quality, especially for gray scale images, use the document feeder glass instead of the ADF.
To fax a document using the Automatic Document Feeder (ADF):
1.Place the document(s) face up on the ADF with the top edge of the documents in first. Then adjust the document guides to the correct document size.
2.Adjust the document resolution, referring to "Adjusting the Document Resolution".
To fax a document from the document feeder glass:
1.Open the document cover.
2. Place the document face down on the document feeder glass and align it with the registration guide on the top left corner of the glass.
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch... 2/29/2012
