Dell 3115CN manual Removing the Used Fuser Unit

Maintaining Your Multifunction Printer Page 7 of 24

the front cover.

Dell fuser unit is available only through Dell. To order by phone, see "Contacting Dell" in the Owner's Manual or in this manual.

Dell recommends Dell fuser unit for your multifunction printer. Dell does not provide warranty coverage for problems caused by using accessories, parts, or components not supplied by Dell.

Removing the Used Fuser Unit

CAUTION: To avoid burns, do not replace the fuser unit immediately after printing, as the fuser unit gets very hot during this process.

1.Turn off the multifunction printer and wait for 30 minutes for the fuser unit to cool down before removal.

2.Push the button (right side) and open the front cover.

3. Lift the chute gate to its upright position.

mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch... 2/29/2012