Dell 3115CN manual Understanding Multifunction Printer Messages

Understanding Multifunction Printer Messages Page 4 of 7

016-799	multifunction printer on the	· Press	to clear the message, cancel the
Data Violation	printer driver does not conform
		current print job, and conduct the next print
Press	to the multifunction printer you
		job, if any.
	are using, this message appears.
		· Ensure that the printer configuration on the
		printer driver conforms to the multifunction
		printer you are using.
Over Heat	Since it is abnormally hot inside	Wait for a while with the multifunction printer
042-700	the multifunction printer,	on until the error disappears.
Cooling down	printing is paused.
Please Wait...
Memory Full	The fax memory is full and	· Press	to clear the message.
017-970	cannot continue processing the	· The fax memory is full and fax job is
FaxJob Failure	current fax job.
		terminated. Print the received images, or wait
Press		for a while until sending images is completed.
Memory Full	The fax memory is full and	· Press	to clear the message.
033-788
	cannot continue processing the	· The fax memory is full. Remove the received
Fax Job Failure	current fax job.
		images, or wait for a while until sending
Press
		images is completed.
Accumulation Limit	Exceeds the maximum sheets of	· Press	to clear the message.
Not Stored	paper at a time when you send a	· The maximum sheets of paper at a time are
For Last Sheet
	fax.	loaded.
Press		· Load up to 50 sheets of paper at a time.
No Answer	No answer is received from the	· Press	to clear the message.
035-701
	remote machine.	· No answer is received from the remote
Fax Job Failure
	(T1 timeout on sending data)	machine. Check the status of the remote
Press		machine.
Communication	The communication was shut by	· Press	to clear the message.
035-702	the remote machine.	· The communication was shut by the remote
Fax Job Failure
	(Received DCN)	machine. Check the status of the remote
Press		machine.
No Answer	No answer is received from the	· Press	to clear the message.
035-718	remote machine.	· No answer is received from the remote
Fax Job Failure
	(T1 timeout on receiving data)	machine. Check the status of the remote
Press		machine.
Communication	The remote machine cannot	· Press	to clear the message.
035-720
	receive data.	· The remote machine cannot receive data.
Fax Job Failure
		Check the features of the remote machine.
Press
No Dial Tone	Cannot detect a dial tone before	· Press	to clear the message.
035-746	dialing the number.	· A dial tone cannot be detected. Check the
Fax Job Failure
		communication line.
Press
Busy	The busy tone was detected	· Press	to clear the message.
035-781	after dialing the number.	· The busy tone was detected. Wait for a while
Fax Job Failure
		and redial the number.
Press

mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch... 2/29/2012