c.
Click
File
o
Properties
.
d. From the General tab, click Print Test Page (Print a Test Page for Windows 2000).
When a test page prints successfully, printer installation is complete.
For Windows Vista and Window Server 2008
1. Click StartoControl PaneloHardware and SoundoPrinters (StartoControl PaneloPrinters
for Windows Server 2008).
2. Click Add a printer to launch the Add Printer wizard.
3. Select Add a network, wireless or Bluetooth printer, and then click Next. If the printer is listed,
select the printer and click Next, or select The printer that I want isn't listed and type in the path
of the printer in the Select a shared printer by name text box and click Next.
For example: \\<server host name>\<shared printer name>
The server host name is the name of the server computer that identifies it to the network. The shared
printer name is the name assigned to the printer during the server installation process.
4. If this is a new printer, you may be prompted to install a printer driver. If no system driver is available,
then you will need to provide a path to available drivers.
5. Select whether you want this printer to be the default printer for the client, click Next.
6. If you want to the verify printer driver installation then click Print a test page.
7. Click Finish.
Setting Up a Network-connected Printer
You must set up the network protocols on the multifunction printer to use it as your network printer. Setting
protocols can be accomplished by using the supplied network program.
You can configure the basic network parameters through the multifunction printer's operator panel. Use the
printer operator panel to do the following:
zPrint a Network Configuration Page
zConfigure TCP/IP

Configuring Network Parameters on the Operator Panel

Item Requirements
Network Interface 10/100 Base-TX
Network Operating System Windows 98/Me, NT 4.0/2000/XP/Vista/Server 2003/Server 2008
Network Protocols · TCP/IP on Windows
· Port9100 on Windows 2000//XP/Vista/Server 2003/Server 2008
Page
5
of
8
2/
29/
2012
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch
...