Removing the Optional Duplexer
1. Ensure that the multifunction printer is turned off and unplug the power cord from the rear of the
multifunction printer.
2. Push the button (right side) and open the front cover.
3. Pull up on the belt release levers and rotate the transfer belt unit up as shown in the illustration.
NOTICE: Ensure nothing touches or scratches the surface (black-colored film) of the transfer belt unit.
Scratches, dirt, or oil from your hands on the film of the transfer belt unit may reduce print quality.
NOTICE: To protect the drums of the print cartridges against bright light, close the front cover within
five minutes. If the front cover remains open for more than five minutes, print quality may deteriorate.
Page
3
of
11
Removing Options
2/
29/
2012
...