6. Close the control board cover and turn the screw clockwise.
7. Turn on the multifunction printer.
8. Print a system settings page to verify that the additional print memory is installed correctly.
a. Press until >SETUP appears, and then press .
b. Press until >Reports appears, and then press .
c. System Settings is displayed. Press .
The system settings page is printed.
d. Verify the capacity of the installed memory listed in the system settings under General.
If the memory capacity has not increased, turn off the multifunction printer, unplug the power cable, and reinstall the
memory card.
9. If you installed the additional print memory after installing the printer driver, update your driver by following the instructions for
the operating system you are using. If the multifunction printer is on a network, update the driver for each client.
When Using PCL Driver
Microsoft®Windows Vista®
1. Click StartoControl PaneloHardware and SoundoPrinters.
2. Right-click the multifunction printer and select Properties.
3.
Click the
Options
tab, and then select
Get
Information from Printer
.
NOTE: Ensure that the memory card is firmly fixed in the slot and cannot be moved easily.
Page
of
48
Installing Optional Modules
2/
29/
2012
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch
...