1. Ensure that the multifunction printer is turned off and unplug all cables including the power cord from the rear of the
multifunction printer.
2. Remove the single thumbscrew from the top of the plate covering the wireless printer adapter socket and then remove the plate.
3. Insert the wireless printer adapter into the USB socket with the Dell logo of the adapter facing out.
4. Attach the wireless printer adapter cap by inserting the cap with the mark facing out until it clicks into place.
Security 64(40-bit key)/128(104-bit key) WEP Encryption/WPA/WAP2
NOTE:To use the wireless printer adapter, you must install the multi-protocol card first. To install the card, see "Installing the
Dell Multi-Protocol Card".
NOTE: Ensure that the multi-protocol card is installed.
NOTE:Ensure that the adapter is firmly fixed in the socket and cannot be moved easily.
Page
17
of
48
Installing Optional Modules
2/
29/
2012
...