Setting E-Mail Alert
1. Form the Dell Printer Configuration Web Tool, click E-Mail Alert.
The E-mail Server Alert Settings page appears.
2. Specify the settings for E-Mail Alert as follows:
Primary SMTP gateway: Enter the IP address of the e-mail server.
E-Mail Send Authentication: Specify Invalid to enable the e-mail server.
3. Click the Apply New Settings button.
Registering a New User
1. Form the Dell Printer Configuration Web Tool, click Address Book, and then click the E-Mail Address tab.
2. Click the Create button.
The E-mail Server Settings page for registering a new user appears.
3. Enter the following:
zName
zAddress
4. Click the Apply New Settings button.
Start to send e-mail with the scanned file
1. From the operator panel, press until >SCAN appears, and then press .
2. Press until Scan to E-Mail appears, and then press .
3. Press or to select the setting listed below, and then press .
Enter E-Mail: Type the e-mail address directly.
NOTE: If the error message including 016-506 or 016-764 is displayed, contact your server administrator for the settings for E-Mail
Send Authentication.
Page
17
of
18
Scanning
2/
29/
2012
...