Faxing | Page 19 of 20 |
To turn the secure receiving mode off:
1.Access the Secure Receive menu by following steps 1 to 5 in "To turn the secure receiving mode on:".
2.Press to select Disable, and then press .
3.To return to the standby mode, press Cancel.
Printing Reports
The following reports are available:
Speed Dial
This list shows all of the numbers currently stored in the printer's memory as speed dial numbers.
You can print this Speed Dial list from the operator panel; see "Printing a Speed Dial List".
Address Book
This list shows all of the numbers currently stored in the printer's memory as Address Book information.
Server Address
This list shows all of the numbers currently stored in the printer's memory as Server Address information.
Fax Activity
This report shows information about the faxes you recently received or sent.
Fax Pending
This list shows the status of pending faxes. You may print this list to confirm your changes after changing any settings.
Printing a Report
1.Press until >SETUP appears, and then press .
2.Press until >Admin Menu appears, and then press .
3.Press until >Admin Reports appears, and then press .
4.Press to select the report or list you want to print. A list showing your speed dial entries prints out. Speed Dial: Speed Dial list
Address Book: Address Book list
Server Address: Server Address list
Fax Activity: Fax activity information
Fax Pending: Pending faxes
Print Meter: Print volume report
5.Press .
The selected information prints out.
Changing Setting Options
1.Press until >FAX appears, and then press .
2.Press until >Fax Defaults appears, and then press .
3.Press to select the desired menu item, and then press .
4.When the option you want appears on the display, press to select the desired status or enter the desired value using the number keypad.
5.Press to save the selection.
6.You can exit from the setup mode at any time by pressing Cancel.
Using an Answering Machine
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch... 2/29/2012