Dell 3115CN manual Print Server Settings

Dell Printer Configuration Web Tool Page 24 of 40

Clear Storage Click Start to clear all files stored in the RAM disk.

Non-Dell Toner

Purpose:

Specifies whether to use the refilled print cartridge or not. When this setting is on, you can use print cartridges provided by other companies.

Values:

Non-Dell

Toner

Overrides factory print cartridge setting.

Non-Dell-brand print cartridges may disable some printer features, reduce print quality and reduce the reliability of your multifunction printer. Dell recommends only new Dell-brand print cartridges for your multifunction printer. Dell does not provide warranty coverage for problems caused by using accessories, parts, or components not supplied by Dell.

Initialize PrintMeter

Purpose:

To initialize the print meter of the multifunction printer. Executing this function restarts the multifunction printer.

Values:

Initialize PrintMeter

Click Start to initialize the print meter.

Clock Settings

Purpose:

To specify the clock settings.

Values:

Date Format	Specifies the date format.
Time Format	Specifies the time format in 24H or 12H.
Time Zone	Specifies the time zone.
Set Date	Sets the date format. The default is mm/dd/yy.
Set Time	Sets the time.

Web Link Customization

Purpose:

To configure the link used for ordering supplies.

Values:

Select Reorder URL

Specifies the URL that Order Supplies at links to in the left frame.

Regular

http://accessories.us.dell.com/sna

Premier

http://premier.dell.com

Print Server Settings

Use the Print Server Settings menu to set the type of printer interface and necessary conditions for communications.

The following tabbed pages are displayed in the top of the Right Frame.

Print Server Reports

The Print Server Reports tab includes Print Server Setup Page, NetWare Setup Page, and E-Mail Alert Setup Page.

Print Server Setup Page

Purpose:

To verify the current settings of TCP/IP (Transmission Control Protocol/Internet Protocol) protocol and printing ports. On this page, you can only verify the settings of items. If you want to change the settings, go to the pages in the Print Server Settings tab.

Values:

Ethernet*1

Ethernet Settings	Displays the current settings of Ethernet transmission rate and the duplex settings.
Current Ethernet Settings	Displays the current Ethernet settings.

mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch... 2/29/2012