System Settings | Page 3 of 3 |
Resetting Defaults
After executing this function and rebooting the multifunction printer, all the menu parameters, except the parameters for the network, are reset to their default values.
1.Press 
until >SETUP appears, and then press 
.
2.Press 
until >Admin Menu appears, and then press 
.
3.Press 
until >Maintenance appears, and then press 
4.Press 
until >Initialize NVM appears, and then press 
.
5.Press 
to select >User Section or >System Section, and then press 
.
6.The Are you sure? message appears on the operator panel. Press 
7.The multifunction printer is turned off automatically to apply the settings.
Initializing NVRAM for Network Settings
You can initialize the IP address and
1.Press 
until >SETUP appears, and then press 
.
2.Press 
until >Admin Menu appears, and then press 
.
3.Press 
until >Wired Net or Wireless Net appears, and then press 
.
4.Press 
until >Reset LAN or >Reset MPC appears, and then press 
5.The Are you sure? message appears on the operator panel. Press 
6.Turn off the multifunction printer, and then on again to apply the settings.
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch... 2/29/2012
