3. Remove the seals over the levers at both ends of the fuser unit, and then pull the tag to remove the
seal from the fuser unit.
4. Hold one print cartridge firmly and shake it five or six times to distribute the toner evenly.
NOTE: Ensure to lock both levers at ends of the fuser unit, after removing the seal.
Page
2
of
4
Installing the Print Cartridges
2/
29/
2012
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch
...