8. Close the front cover.
9. Turn on the multifunction printer.
10. Print a system settings page to verify that the optional duplexer is installed correctly.
a. Press until >SETUP appears, and then press .
b. Press until >Reports appears, and then press .
c. System Settings is displayed. Press .
The system settings page is printed.
d. Verify Duplexer is listed in the system settings under Printer Options.
If the duplexer is not listed, turn off the multifunction printer, unplug the power cable, and reinstall the optional duplexer.
11. If you installed the optional duplexer after installing the printer driver, update your driver by following the instructions for each
operating system. If the multifunction printer is on a network, update the driver for each client.
When Using PCL Driver
Microsoft®Windows Vista®
1. Click StartoControl PaneloHardware and SoundoPrinters.
2. Right-click the multifunction printer and select Properties.
Page
8
of
48
Installing Optional Modules
2/
29/
2012
...