Dell 3115CN manual Fax Settings, Interval Timer

Understanding Menus Page 37 of 61

Purpose:

To specify the ECP communication mode of the parallel interface. The change becomes effective after the multifunction printer is turned off and then on again.

Values:

The ECP communication mode is enabled.

Enable*

The ECP communication mode is disabled.

Disable

Adobe Protocol

Purpose:

To specify PostScript communication protocol for each interface. You can configure Adobe Protocol settings for the wireless network. The change becomes effective after the multifunction printer is turned off and then on again.

Values:

Used when auto-detecting the PostScript communication protocol.

Auto

Used when the communication protocol is in ASCII interface.

Standard

BCP	Used when the communication protocol is in binary format.
TBCP*	Used when the communication protocol supports both ASCII and binary data to switch between
	them according to the specified control code.
Binary	Used when no special processing is required.

USB Settings

Use the USB Settings menu to change printer settings affecting a USB port.

NOTE: Values marked by an asterisk (*) are the factory default menu settings.

Fax Settings

Use the Fax Settings menu to configure the basic fax settings.

NOTE: Values marked by an asterisk (*) are the factory default menu settings.

Interval Timer

Purpose:

mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch... 2/29/2012