Dell 3115CN manual LineTermination, Default Color, PS Error Report

Understanding Menus Page 26 of 61

Enable

Prints in the draft mode.

LineTermination

Purpose:

To add the line termination commands.

Values:

Off*	The line termination command is not added.
	CR=CR, LF=LF, FF=FF
Add-LF	The LF command is added.
	CR=CR-LF, LF=LF, FF=FF
Add-CR	The CR command is added.
	CR=CR, LF=CR-LF, FF=CR-FF
CR-XX	The CR and LF commands are added.
	CR=CR-LF, LF=CR-LF, FF=CR-FF

Default Color

Purpose:

To specify the color mode to Color or Black. This setting is used when the color printing mode setting is not specified for the print job that is sent to the multifunction printer.

Value:

Prints in the black and white mode.

Black*

Prints in the color mode.

Color

PostScript

Use the PostScript menu to change printer settings that only affect jobs using the PostScript emulation printer language.

NOTE: Values marked by an asterisk (*) are the factory default menu settings.

PS Error Report

Purpose:

To specify whether the multifunction printer outputs error contents for a PostScript error. The change becomes effective after the printer is turned off and then on again.

mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch... 2/29/2012