Country
Purpose:
To select the country where the multifunction printer is used.
Fwd. Error Print
Purpose:
To print the documents failed to transfer when Forward Set Print is set to Off.
Values:
System Settings
Use the System Settings menu to configure the basic printer settings.
Power Saver Mode2
Purpose:
To enable Power Saver Mode2.
Values:
Power Saver Timer
Purpose:
To specify the amount of time the multifunction printer waits after a job is submitted before it goes into the
power saver mode.
Values:
Higher Sets Higher in the threshold value.
On* Prints documents that failed to transfer when Forward Set Print is set to Off.
Off Does not print documents that failed to transfer when Forward Set Print is set to Off.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Enable* Enables Power Saver Mode2.
Disable Disables Power Saver Mode2.
Mode1 5-60
min
Specifies the amount of time before the multifunction printer enters power saver mode
after it finishes a job.
Page
44
of
61
Understanding Menus
2/
29/
2012
...