SMC Networks 100BASE-TX Radius-server port, Default Setting Auth-port, Retransmit Command Mode

4 Command Line Interface

•timeout - Number of seconds the switch waits for a reply before resending a request. (Range: 1-65535)

•retransmit - Number of times the switch will try to authenticate logon access via the RADIUS server. (Range: 1-30)

•key - Encryption key used to authenticate logon access for client. Do not use blank spaces in the string. (Maximum length: 20 characters)

Default Setting

•auth-port - 1812

•timeout - 5 seconds

•retransmit - 2

Command Mode

Global Configuration

Example

Console(config)#radius-server 1 host 192.168.1.20 auth-port 181 timeout 10 retransmit 5 key green

Console(config)#

radius-server port

This command sets the RADIUS server network port. Use the no form to restore the default.

Syntax

radius-server port port_number no radius-server port

port_number - RADIUS server UDP port used for authentication messages. (Range: 1-65535)

Default Setting

1812

Command Mode

Global Configuration

Example

Console(config)#radius-server port 181

Console(config)#

4-70