SMC Networks 16 10BASE-T, 100BASE-TX manual Show management

System Management Commands 4

Example

This example restricts management access to the indicated addresses.

Console(config)#management all-client 192.168.1.19 Console(config)#management all-client 192.168.1.25 192.168.1.30 Console(config)#

show management

This command displays the client IP addresses that are allowed management access to the switch through various protocols.

Syntax

show management {all-client http-client snmp-client telnet-client}

•all-client- Adds IP address(es) to the SNMP, web and Telnet groups.

•http-client- Adds IP address(es) to the web group.

•snmp-client- Adds IP address(es) to the SNMP group.

•telnet-client- Adds IP address(es) to the Telnet group.

Command Mode

Global Configuration

Example

Console#show management all-client

Management IP	Filter
HTTP-Client:		End IP address
Start IP address

-----------------------------------------------

1.	192.168.1.19	192.168.1.19
2.	192.168.1.25	192.168.1.30
SNMP-Client:		End IP address
	Start IP address

-----------------------------------------------

1.	192.168.1.19	192.168.1.19
2.	192.168.1.25	192.168.1.30
TELNET-Client:		End IP address
	Start IP address

-----------------------------------------------

1.	192.168.1.19	192.168.1.19
2.	192.168.1.25	192.168.1.30

Console#

4-29