SMC Networks 100BASE-TX, 16 10BASE-T manual Displaying Log Messages, Displaying System Logs

3 Configuring the Switch

CLI – Enter the syslog server host IP address, choose the facility type and set the logging trap.

Console(config)#logging host 192.168.1.15		4-45
Console(config)#logging facility 23		4-45
Console(config)#logging trap 4		4-46
Console(config)#end
Console#show logging trap	Enabled	4-46
Syslog logging:
REMOTELOG status:	Enabled
REMOTELOG facility type:	local use 7
REMOTELOG level type:	Warning conditions

REMOTELOG server ip address: 192.168.1.15

REMOTELOG server ip address: 0.0.0.0

REMOTELOG server ip address: 0.0.0.0

REMOTELOG server ip address: 0.0.0.0

REMOTELOG server ip address: 0.0.0.0

Console#

Displaying Log Messages

The Logs page allows you to scroll through the logged system and event messages. The switch can store up to 2048 log entries in temporary random access memory (RAM; i.e., memory flushed on power reset) and up to 4096 entries in permanent flash memory.

Web – Click System, Log, Logs.

Figure 3-17. Displaying System Logs

3-26