SMC Networks 16 10BASE-T manual Whichboot, File Directory Information, Column Heading Description

Flash/File Commands 4

Command Mode

Privileged Exec

Command Usage

•If you enter the command dir without any parameters, the system displays all files.

•A colon (:) is required after the specified unit number.

•File information is shown below:

	Table 4-25. File Directory Information
Column Heading		Description
file name		The name of the file.
file type		File types: Boot-Rom, Operation Code, and Config file.
startup		Shows if this file is used when the system is started.
size		The length of the file in bytes.

Example

The following example shows how to display all file information:

Console#dir
file name	file type		startup size (byte)
------------------------------	-------------- ------- ---------
D2.2.1.3	Boot-Rom image	Y	169740
V2.2.1.9	Operation Code	Y	1635684
Factory_Default_Config.cfg	Config File	Y	5013
-------------------------------------------------------------------------
	Total free	space: 5373952
Console#

whichboot

This command displays which files were booted when the system powered up.

Syntax whichboot [unit]

unit - Specifies the unit number.

Default Setting

None

Command Mode

Privileged Exec

4-65