SMC Networks 16 10BASE-T, 100BASE-TX manual Priority Commands Layer 3 Function Mode

	Priority Commands		4
Priority Commands (Layer 3 and 4)
	Table 4-59. Priority Commands (Layer 3 and 4)
Command	Function	Mode	Page
map ip port	Enables TCP class of service mapping	GC	4-169
map ip port	Maps TCP socket to a class of service	IC	4-170
map ip precedence	Enables IP precedence class of service mapping	GC	4-169
map ip precedence	Maps IP precedence value to a class of service	IC	4-171
map ip dscp	Enables IP DSCP class of service mapping	GC	4-172
map ip dscp	Maps IP DSCP value to a class of service	IC	4-172
map access-list ip	Sets the CoS value and corresponding output queue for	IC	4-91
	packets matching an ACL rule
map access-list mac	Sets the CoS value and corresponding output queue for	IC	4-96
	packets matching an ACL rule
show map ip port	Shows the IP port map	PE	4-173
show map ip precedence	Shows the IP precedence map	PE	4-174
show map ip dscp	Shows the IP DSCP map	PE	4-175
show map access-list ip	Shows CoS value mapped to an access list for an interface	PE	4-92
show map access-list mac	Shows CoS value mapped to an access list for an interface	PE	4-97

map ip port (Global Configuration)

This command enables IP port mapping (i.e., class of service mapping for TCP/UDP sockets). Use the no form to disable IP port mapping.

Syntax

[no] map ip port

Default Setting

Disabled

Command Mode

Global Configuration

Command Usage

The precedence for priority mapping is IP Port, IP Precedence or IP DSCP, and default switchport priority.

Example

The following example shows how to enable TCP/UDP port mapping globally:

Console(config)#map ip port

Console(config)#

4-169