SMC Networks 100BASE-TX, 16 10BASE-T manual Syntax Parity none even odd no parity

4 Command Line Interface

Command Usage

The databits command can be used to mask the high bit on input from devices that generate 7 data bits with parity. If parity is being generated, specify 7 data bits per character. If no parity is required, specify 8 data bits per character.

Example

To specify 7 data bits, enter this command:

Console(config-line)#databits 7

Console(config-line)#

Related Commands

parity (4-16)

parity

This command defines the generation of a parity bit. Use the no form to restore the default setting.

Syntax

parity {none even odd} no parity

•none - No parity

•even - Even parity

•odd - Odd parity

Default Setting

No parity

Command Mode

Line Configuration

Command Usage

Communication protocols provided by devices such as terminals and modems often require a specific parity bit setting.

Example

To specify no parity, enter this command:

Console(config-line)#parity none

Console(config-line)#

4-16