SMC Networks 100BASE-TX, 16 10BASE-T manual Show sntp, Clock timezone, Sntp client

4 Command Line Interface

Command Usage

This command is only applicable when the switch is set to SNTP client mode.

Example

Console(config)#sntp poll 60

Console(config)#

Related Commands

sntp client (4-50)

show sntp

This command displays the current time and configuration settings for the SNTP client, and indicates whether or not the local time has been properly updated.

Command Mode

Normal Exec, Privileged Exec

Command Usage

This command displays the current time, the poll interval used for sending time synchronization requests, and the current SNTP mode (i.e., unicast).

Example

Console#show sntp

Current time: Jan 1 00:13:42 2001

Poll interval: 60

Current mode: unicast

SNTP status : Enabled

SNTP server 10.1.0.19 0.0.0.0 0.0.0.0

Current server: 10.1.0.19

Console#

clock timezone

This command sets the time zone for the switch’s internal clock.

Syntax

clock timezone name hour hours minute minutes {before-utc after-utc}

•name - Name of timezone, usually an acronym. (Range: 1-29 characters)

•hours - Number of hours before/after UTC. (Range: 1-12 hours)

•minutes - Number of minutes before/after UTC. (Range: 0-59 minutes)

•before-utc- Sets the local time zone before (east) of UTC.

•after-utc- Sets the local time zone after (west) of UTC.

Default Setting

None

Command Mode

Global Configuration

4-52