SMC Networks 100BASE-TX, 16 10BASE-T manual 122

3 Configuring the Switch

CLI – The following example configures LACP parameters for ports 1-4. Ports 1-4 are used as active members of the LAG.

Console(config)#interface ethernet 1/1			4-104
Console(config-if)#lacp actor system-priority 3			4-122
Console(config-if)#lacp actor admin-key 120			4-123
Console(config-if)#lacp actor port-priority 128			4-125
Console(config-if)#exit
.
.
.
Console(config)#interface ethernet 1/4
Console(config-if)#lacp actor system-priority 3
Console(config-if)#lacp actor admin-key 120
Console(config-if)#lacp actor port-priority 512
Console(config-if)#end
Console#sh lacp sysid		System MAC Address	4-125
Channel Group	System Priority

-------------------------------------------------------------------------

1	32768	00-00-E9-31-31-31
2	32768	00-00-E9-31-31-31
3	32768	00-00-E9-31-31-31
4	32768	00-00-E9-31-31-31

Console#show lacp	1 internal	4-125
Channel group : 1

-------------------------------------------------------------------------

Oper Key : 120

Admin Key : 120 Console#

3-72