SMC Networks 16 10BASE-T, 100BASE-TX manual Syntax Show spanning-tree interface

Spanning Tree Commands 4

Example

Console(config)#interface ethernet 1/5

Console(config-if)#spanning-tree protocol-migration

Console(config-if)#

show spanning-tree

This command shows the configuration for the spanning tree.

Syntax

show spanning-tree [interface]

•interface

•ethernet unit/port

-unit - This is device 1.

-port - Port number.

•port-channel channel-id(Range: 1-4)

Default Setting

None

Command Mode

Privileged Exec

Command Usage

•Use the show spanning-treecommand with no parameters to display the spanning tree configuration for the switch and for every interface in the tree.

•Use the show spanning-treeinterface command to display the spanning tree configuration for an interface.

•For a description of the items displayed under “Spanning-tree information,” see “Configuring Global Settings” on page 3-93.For a description of the items displayed for specific interfaces, see “Displaying Interface Settings” on page 3-96.

4-143