SMC Networks 100BASE-TX, 16 10BASE-T manual Light unit, System Status Commands Function Mode

4 Command Line Interface

Command Mode

Normal Exec, Privileged Exec

Example

Console#show calendar 15:12:34 April 1 2004

Console#

System Status Commands

Table 4-22. System Status Commands

Command	Function	Mode	Page
light unit	Displays the unit ID of a switch using its front-panel LED	NE, PE	4-54
	indicators
show startup-config	Displays the contents of the configuration file (stored in flash	PE	4-55
	memory) that is used to start up the system
show running-config	Displays the configuration data currently in use	PE	4-56
show system	Displays system information	NE, PE	4-58
show users	Shows all active console and Telnet sessions, including user	NE, PE	4-58
	name, idle time, and IP address of Telnet clients
show version	Displays version information for the system	NE, PE	4-59

light unit

This command displays the unit ID of a switch using its front-panel LED indicators.

Syntax

light unit [unit]

• unit - specifies a unit in a switch stack to light the panel LEDs

Default Setting

None

Command Mode

Normal Exec, Privileged Exec

Command Usage

The unit ID is displayed using the port status LED indicators for ports 1 to 8. When the light unit command is entered, the LED corresponding to the switch’s ID will flash for about 15 seconds.

Example

Console#light unit 1

Console#

4-54