SMC Networks 100BASE-TX, 16 10BASE-T manual Dot1x max-req, Syntax Dot1x default Command Mode

4 Command Line Interface

dot1x default

This command sets all configurable dot1x global and port settings to their default values.

Syntax

dot1x default

Command Mode

Global Configuration

Example

Console(config)#dot1x default

Console(config)#

dot1x max-req

This command sets the maximum number of times the switch port will retransmit an EAP request/identity packet to the client before it times out the authentication session. Use the no form to restore the default.

Syntax

dot1x max-req count no dot1x max-req

count – The maximum number of requests (Range: 1-10)

Default

2

Command Mode

Interface Configuration

Example

Console(config)#interface eth 1/2

Console(config-if)#dot1x max-req 2

Console(config-if)#

4-78