SMC Networks 16 10BASE-T, 100BASE-TX manual Show gvrp configuration, Garp timer

GVRP and Bridge Extension Commands 4

show gvrp configuration

This command shows if GVRP is enabled.

Syntax

show gvrp configuration [interface]

interface

•ethernet unit/port

-unit - This is device 1.

-port - Port number.

•port-channel channel-id(Range: 1-4)

Default Setting

Shows both global and interface-specific configuration.

Command Mode

Normal Exec, Privileged Exec

Example

Console#show gvrp configuration ethernet 1/6

Eth 1/ 6:

GVRP configuration: Enabled

Console#

garp timer

This command sets the values for the join, leave and leaveall timers. Use the no form to restore the timers’ default values.

Syntax

garp timer {join leave leaveall} timer_value no garp timer {join leave leaveall}

•{join leave leaveall} - Which timer to set.

•timer_value - Value of timer. Ranges:

join: 20-1000 centiseconds

leave: 60-3000 centiseconds

leaveall: 500-18000 centiseconds

Default Setting

•join: 20 centiseconds

•leave: 60 centiseconds

•leaveall: 1000 centiseconds

Command Mode

Interface Configuration (Ethernet, Port Channel)

4-161