SMC Networks 16 10BASE-T, 100BASE-TX manual Displaying Switch Hardware/Software Versions

		Basic Configuration
			3
CLI – Specify the hostname, location and contact information.
Console(config)#hostname R&D 5		4-25
Console(config)#snmp-server location WC 9		4-100
Console(config)#snmp-server contact Ted		4-100
Console(config)#exit
Console#show system		4-58
System description: TigerSwitch 10/100 6716AL2
System OID string: 1.3.6.1.4.1.202.20.40
System information	0 days, 2 hours, 4 minutes, and 7.13 seconds
System Up time:
System Name:	R&D 5
System Location:	WC 9
System Contact	Ted
MAC address	00-30-F1-12-34-56
Web server:	enabled
Web server port:	80
Web secure server:	enabled
Web secure server port: 443
Telnet server:	enabled
Telnet server port:	23
Jumbo Frame:	Disabled
POST result
DUMMY Test 1.................PASS
UART LOOP BACK Test..........PASS
DRAM Test....................PASS
Timer Test...................PASS
RTC Initialization...........PASS
Switch Int Loopback test.....PASS
Done All Pass.
Console#

Displaying Switch Hardware/Software Versions

Use the Switch Information page to display hardware/firmware version numbers for the main board and management software, as well as the power status of the system.

Field Attributes

Main Board

•Serial Number – The serial number of the switch.

•Number of Ports – Number of built-in RJ-45 ports and SFP slots.

•Hardware Version – Hardware version of the main board.

•Internal Power Status – Displays the status of the internal power supply.

Management Software

•Loader Version – Version number of loader code.

•Boot-ROM Version – Version of Power-On Self-Test (POST) and boot code.

•Operation Code Version – Version number of runtime code.

•Role – Shows that this switch is operating as Master (i.e., operating stand-alone).

Expansion Slot

• Expansion Slot 1/2 – Indicates any installed module type.

3-9