belt to allow the operator to change speeds and can be used like a clutch during operation. See photograph below.
Direction Switch
Belt
Tension
Lever
Do not change the Direction Switch
rotation while running Lathe.
Feed Rate
1.The Feed Rate Lever (above) chang- es the number of
Feed rate portion of machine plate
| 40 |
| 80 |
a | 40 |
c | 127 |
| |
b |
|
Lever | 9 | 1 | 9 | 1 | 1 |
a | 28 | 28 | 28 | 28 | 45 |
b | 80 | 80 | 60 | 60 | 60 |
c | 80 | 80 | 120 | 120 | 120 |
Feed | 0.0023 | 0.004 | 0.005 | 0.008 | 0.013 |
2.During metric thread cutting the half nut must remain engaged through entire threading process. The thread dial cannot be utilized.
SKU 45861 | For technical questions, please call | Page 15 |
