SMC Networks 100BASE-TX, 16 10BASE-T manual Displaying Spanning Tree Information

3 Configuring the Switch

•Path Cost Method – The path cost is used to determine the best path between devices. The path cost method is used to determine the range of values that can be assigned to each interface.

Web – Click Spanning Tree, STA, Information.

Figure 3-55. Displaying Spanning Tree Information

CLI – This command displays global STA settings, followed by settings for each port.

Console#show spanning-tree 4-143

Spanning-tree information

---------------------------------------------------------------

Spanning tree mode		:RSTP
Spanning tree enable/disable		:enabled
Priority	Time (sec.)	:32768
Bridge Hello		:2
Bridge Max Age (sec.)		:20
Bridge Forward Delay (sec.)		:15
Root Hello Time (sec.)		:2
Root Max Age	(sec.)	:20
Root Forward	Delay (sec.)	:15
Designated Root		:32768.0.0000ABCD0000
Current root	port	:1
Current root	cost	:200000
Number of topology changes		:1
Last topology changes time (sec.):13380
Transmission	limit	:3
Path Cost Method		:long

.

.

.

Note: The current root port and current root cost display as zero when this device is not connected to the network.

3-92