SMC Networks 16 10BASE-T, 100BASE-TX Telnet Server Commands, Ip telnet port, Ip telnet server

	System Management Commands		4
Telnet Server Commands
	Table 4-14. Telnet Server Commands
Command	Function	Mode	Page
ip telnet port	Specifies the port to be used by the Telnet interface	GC	4-30
ip telnet server	Allows the switch to be monitored or configured from Telnet	GC	4-30

ip telnet port

This command specifies the TCP port number used by the Telnet interface. Use the no form to use the default port.

Syntax

ip telnet port port-numberno ip telnet port

port-number- The TCP port to be used by the browser interface. (Range: 1-65535)

Default Setting

23

Command Mode

Global Configuration

Example

Console(config)#ip telnet port 123

Console(config)#

Related Commands

ip telnet server (4-33)

ip telnet server

This command allows this device to be monitored or configured from Telnet. Use the no form to disable this function.

Syntax

[no] ip telnet server

Default Setting

Enabled

Command Mode

Global Configuration

Example

Console(config)#ip telnet server

Console(config)#

4-33