SMC Networks 100BASE-TX manual Show system, Show users, This command displays system information

4 Command Line Interface

show system

This command displays system information.

Default Setting

None

Command Mode

Normal Exec, Privileged Exec

Command Usage

•For a description of the items shown by this command, refer to “Displaying System Information” on page 3-8.

•The POST results should all display “PASS.” If any POST test indicates “FAIL,” contact your distributor for assistance.

Example

Console#show system
System description: TigerSwitch 10/100 6716AL2
System OID string: 1.3.6.1.4.1.202.20.40
System information	0 days, 0 hours, 21 minutes, and 7.32 seconds
System Up time:
System Name:	[NONE]
System Location:	[NONE]
System Contact:	[NONE]
MAC address:	12-34-12-34-12-34
Web server:	enabled
Web server port:	80
Web secure server:	enabled
Web secure server port:	443
Telnet server	: enable
Telnet port	: 23
Jumbo Frame :	Disabled
POST result	PASS
DUMMY Test 1
UART LOOP BACK Test	PASS
DRAM Test	PASS
Timer Test	PASS
RTC Initialization	PASS
Switch Int Loopback test	.....PASS
Done All Pass.
Console#

show users

Shows all active console and Telnet sessions, including user name, idle time, and IP address of Telnet client.

Default Setting

None

Command Mode

Normal Exec, Privileged Exec

4-58