SMC Networks 16 10BASE-T, 100BASE-TX manual Show map access-list mac, Egress Queue Priority Mapping

Access Control List Commands 4

Command Usage

•You must configure an ACL mask before you can map CoS values to the rule.

•A packet matching a rule within the specified ACL is mapped to one of the output queues as shown below.

Table 4-36. Egress Queue Priority Mapping

Queue	0	1	2	3
Priority	1,2	0,3	4,5	6,7

Example

Console(config)#int eth 1/5

Console(config-if)#map access-list mac M5 cos 0

Console(config-if)#

Related Commands

queue cos-map(4-166)

show map access-list mac (4-97)

show map access-list mac

This command shows the CoS value mapped to a MAC ACL for the current interface. (The CoS value determines the output queue for packets matching an ACL rule.)

Syntax

show map access-list mac [interface]

interface

•ethernet unit/port

-unit - This is device 1.

-port - Port number.

Command Mode

Privileged Exec

Example

Console#show map access-list mac

Access-list to COS of Eth 1/5

Access-list M5 cos 0

Console#

Related Commands

map access-list mac (4-96)

4-97