SMC Networks 16 10BASE-T, 100BASE-TX Address Table Commands, show lacp sysid display description

			Address Table Commands
				4
Console#show lacp sysid			System MAC Address
Port Channel	System Priority
-------------------------------------------------------------------------
1	32768		12-34-12-34-12-34
2	32768		12-34-12-34-12-34
3	32768		12-34-12-34-12-34
4	32768		12-34-12-34-12-34
Console#
	Table 4-47. show lacp sysid - display description
Field		Description
Channel group		A link aggregation group configured on this switch.
System Prioritya		LACP system priority for this channel group.
System MAC Addressa		System MAC address.

a. The LACP system priority and system MAC address are concatenated to form the LAG system ID.

Address Table Commands

These commands are used to configure the address table for filtering specified addresses, displaying current entries, clearing the table, or setting the aging time.

Table 4-48. Address Table Commands

Command	Function	Mode	Page
mac-address-table static	Maps a static address to a port in a VLAN	GC	4-130
clear mac-address-table	Removes any learned entries from the forwarding database	PE	4-131
dynamic
show mac-address-table	Displays entries in the bridge-forwarding database	PE	4-131
mac-address-table	Sets the aging time of the address table	GC	4-132
aging-time
show mac-address-table	Shows the aging time for the address table	PE	4-132
aging-time

4-129