SMC Networks 100BASE-TX, 16 10BASE-T Syntax Boot system unit boot-romconfig opcode filename

4 Command Line Interface

Example

This example shows the information displayed by the whichboot command. See the table under the dir command for a description of the file information displayed by this command.

Console#whichboot	file type startup size (byte)
file name
--------------------------------	-------------- ------- -----------
D2.2.1.3	Boot-Rom image	Y	169740
V2.2.1.9	Operation Code	Y	1635684
Factory_Default_Config.cfg	Config File	Y	5013
Console#

boot system

This command specifies the image used to start up the system.

Syntax

boot system [unit:] {boot-romconfig opcode}: filename

The type of file or image to set as a default includes:

•boot-rom- Boot ROM.

•config - Configuration file.

•opcode - Run-time operation code.

The colon (:) is required.

filename - Name of the configuration file or image name. unit - Specifies the unit number.

Default Setting

None

Command Mode

Global Configuration

Command Usage

•A colon (:) is required after the specified file type.

•If the file contains an error, it cannot be set as the default file.

•A colon (:) is required after the specified unit number.

Example

Console(config)#boot system config: startup

Console(config)#

Related Commands

dir (4-64) whichboot (4-65)

4-66