Ericsson LBI-39224 System Configuration, CEC/IMC Manager Configuration, CEC/IMC Configuration

LBI-39224

and viewing interface module status data. The various screens and terms the user may encounter are walked through and explained in full detail. The following sub-sections highlight the major functions of the CEC/IMC Manager.

1.2.1 System Configuration

CEC/IMC Manager Configuration

–CEC/IMC Manager User Profiles – Configure CEC/IMC Manager user accounts. This includes user names, passwords, and access levels.

–CEC/IMC Manager Hardware – Set serial interface baud rates for System Manager and CEC/IMC Manager, enable/disable data logging, and set the datalog threshold number.

–CEC/IMC Manager Font Selection – Select font type and size for optimum compatibility with Network Manager platforms.

CEC/IMC Configuration

–Trunked and Console Channels – Adjust audio levels and other related parameters for each site-type, console, and EDACS Data Gateway™ (EDG) interface.

–Conventional Channels – Adjust audio levels, type of control (tone, dc, etc.), and other related parameters for conventional channel interfaces. Set conventional channels for Causeway patch or Causeway simulselect operation.

–Digital Voice Channels – Configure digital voice channels for either pooled (dynamic) or dedicated call assignment operation.

–Logging Recorders – Configure logging recorder parameters such as output level and assigned entity (unit, group, etc.).

–TDM Buses – Configure the number of TDM buses to match number of buses supported by the installed CEC/IMC Audio Boards.

–TDM Bus Time Slots – Allocate the number of TDM bus time slots required by each site-type, console, digital voice,

1-2