Ericsson LBI-39224 manual Tone Controlled Station, State Table command, 167

	LBI-39224
COMMAND	DEFINITION
SET RX FREQ 7	Set receive frequency to frequency 7.
SET RX FREQ 8	Set receive frequency to frequency 8.
REPEAT ENABLE	Enable Repeater.
REPEAT DISABLE	Disable Repeater.
CG ENABLE	Enable Channel Guard.
CG DISABLE	Disable Channel Guard.
CG MON ENABLE	Enable Channel Guard Monitor
	(disabled on PTTs).
CG MON DISABLE	Disable Channel Guard Monitor.
SCAN ENABLE	Scan Enable.
SCAN DISABLE	Scan Disable.
SIM MON ENABLE	Enable simultaneous monitor.
SIM MON DISABLE	Disable simultaneous monitor.

Tone Controlled Station

If "Tone" was selected for	Control	Signaling in	the
Conventional Channel Configuration	dialog	box, choosing	the
State Table button will display	the Tone Controlled Station

State Table Mapping dialog box, Figure 36. If any changes have

been	made	and	not	saved,		you	will	be	prompted
(Write Changes to Disk?)				to	save	them	and	display the
Tone Controlled Station State Table Mapping dialog									box	(Yes),
display	the	Tone Controlled Station State Table Mapping								dialog
box without		saving	(No),	or	cancel	the State Table command

(Cancel) and remain in the Conventional Channel Configuration dialog box.

3-167