Ericsson LBI-39224 manual Save and Send MIM Audio Board Configurations, Save As

LBI-39224

the selected channel by entering "YES" in the ALC text box or disable it by entering "NO."

Save and Send MIM Audio Board Configurations

When channel configuration of the selected interface module is complete, the Site Channel Configuration dialog box changes must be sent to the CEC/IMC before the changes will take effect. This reprograms the MIM Controller Boards. However, it is important to save the new configuration prior to sending it to the CEC/IMC because a send will send the last configuration that was saved to disk; saving first ensures that the actual CEC/IMC channel configuration will be the same as the channel configuration stored on the CEC/IMC Manager hard disk. To save and send configurations, action is required first in the Site Channel Configuration dialog box and then in the Site Channel Configuration List dialog box.

Site Channel Configuration dialog box

Save

Choose the Save button to perform an immediate save of the currently selected site-type interface module's channel configuration. Other "sites" displayed in the list box located at the top of the dialog box are not saved. This channel configuration is saved on the CEC/IMC Manager's hard disk drive. Any previous channel configuration for the "site," if present, is erased and replaced with the current channel configuration. If the CEC/IMC Manager is running remotely or as a part of the EDACS Network Manager, this configuration is saved on the CEC/IMC Manager server, typically local to the CEC/IMC; it is not saved at the remote location.

Save As...

Choose the Save As… button to allow the currently selected site-type interface module channel configurations to be saved as a different site- type interface module. It is provided to speed configurations when similar MIM configurations are required. Upon choosing Save As… a small dialog box, Figure 17, will appear which allows entry of a new MIM number. Select the desired MIM number from one of the choices in the drop-down list box, the choices listed are the selected MIMs in the Configured/Active Sites list box. Like Save, Save As… stores channel configuration on the CEC/IMC Manager server.

3-33