Ericsson LBI-39224 manual Configurable Dvim, Configured/Active Dvim, 134

LBI-39224

Figure 32 DVIM Channel Configuration List Dialog Box

Each DVIM Channel Configuration List dialog box displays the configurable DVIMs and configured/active DVIMs. An active DVIM represents an operating link between a DVIU and the DVIM Controller Board.

Help

Choose the Help button to access the Help function. (Help is also available by pressing the F1 key.)

Configurable DVIM:

The Configurable DVIM list box displays all unconfigured DVIM interface modules. If a DVIM appears in this box, no channel configuration exists at the CEC/IMC Manager for the corresponding site assignment number and the DVIM may be selected for configuration. Any number of these available DVIM may be selected at one time.

Configured/Active DVIM:

The Configured/Active DVIM list box displays DVIMs which have been added but not yet channel-configured, DVIMs which have had previous channel configurations performed, and DVIMs which have been previously channel-configured and have an active Controller Board. Before a DVIM interface module can be channel-configured, it must be listed in the Configured/Active DVIM list box. As with the Configurable DVIM list, any number of the available DVIMs may be selected at one time. All of the selected DVIMs will also be included in the "Save As… " dialog box that is accessed from the

DVIM Channel Configuration dialog box. See Table 1,

3-134