Ericsson LBI-39224 manual Add

LBI-39224

available PIMs may be selected at one time for modification in the Site Channel Configuration dialog box. All selected PIMs in this list will also be included in the "Save As… " dialog box that is accessed from the Site Channel Configuration dialog box or the T1/E1 Digital Site Configuration dialog box. If necessary, refer to Configured/Active Sites Prefix Definitions, Table 1, on page 3-25 for an explanation of the prefixes.

Add

Choose the Add button to move a selected PIM from the Configurable Sites list box and "add" it to the Configured/Active Sites list box where it can be configured. If upon adding a PIM, a configuration data file exists on the CEC/IMC Manager's hard disk drive from a previous add and delete, the site will be added to the Configured/Active Sites list box with its configuration data file (with a ** prefix). This previous configuration may be modified, re-saved and sent as needed.

Modify

Choose the Modify button to display the Audio Interface Type dialog box, select either Audio Board or T1/E1 Interface as required by clicking the appropriate option button. Selecting Audio Board will activate the Site Channel Configuration dialog box, selecting T1/E1 Interface will activate the T1/E1 Digital Site Configuration dialog box. These options are discussed in detail in subsequent sections.

Delete

Choose the Delete button to remove ("delete") a selected configured or unconfigured site from the Configured/Active Sites list box to the Configurable Sites list box. Configured-and-active sites cannot be "deleted." This delete function does not remove "site" channel configuration files from the CEC/IMC Manager's hard disk drive. Therefore, if the deleted "site" is subsequently added back to the Configured/Active Sites list box using the Add button, the previous channel configuration is not lost (this configuration data must be re- saved in the Site Channel Configuration dialog box before it can be resent to the CEC/IMC).

Close

Choose the Close button to exit the Site Channel Configuration List dialog box and return to the CEC/IMC Manager main window. Any "**" (unconfigured and unsaved) PIMs appearing in the

3-66