Ericsson LBI-39224 manual Save and Send StarGate Configurations, Remote CEC Interface, 143

Models: LBI-39224

1 330
Download 330 pages 24.07 Kb
Page 173
Image 173

LBI-39224

This option should only be disabled (unselected) in special circumstances in which routing all calls would cause excessive NIM traffic. In general, StarGate/NIM networks which require large amounts of console dispatch operations will require enabling of this option.

Remote CEC Interface

This function allows all call traffic being monitored by a console or logging recorder on a remote CEC system to be routed by the NIM link. This option must be enabled at both NIMs in the link. The default is disabled (check box unselected) and it should only be enabled (selected) for remote CEC (console only node) links.

Serial Control Link Baud Rate

This drop-down list box allows setting of the NIM control data link baud rate. This link is the control data connection between Network Interface Modules (NIM) coupling two CEC/IMC or StarGate Digital Audio Switches together. The NIM on each end of the link must be manually set to equal baud rates via this field. Select the required value from the available baud rates of 9600, 19.2k, and 38.4k.

Save and Send StarGate Configurations

When the StarGate configurations for all the NIMs have been completed, they must be saved and then sent across the multisite network.

Save

Choose the Save button to perform an immediate save of the currently selected NIM configuration. Other NIMs displayed in the list box located at the top of the dialog box are not saved. The configuration is saved on the CEC/IMC Manager's hard disk drive. Any previous StarGate configuration for the NIM, if present, is erased and replaced with the current configuration. If the CEC/IMC Manager is running remotely or as a part of the EDACS Network Manager, this configuration is saved on the CEC/IMC Manager local to the CEC/IMC; it is not saved at the remote location.

Send

Choose the Send button to send the NIM configuration across the IMC network. This procedure must be performed before the NIM will operate with the new configuration.

3-143

Page 173
Image 173
Ericsson LBI-39224 manual Save and Send StarGate Configurations, Remote CEC Interface, Serial Control Link Baud Rate, 143