Ericsson LBI-39224 manual PIM Site Selection, Help

LBI-39224

PIM "Site" Selection

Prior to actual channel configuration, the interface module to be configured must be selected. From the CEC/IMC Manager menu bar select Configure System / CEC/IMC Configuration / PIM to display the Site Channel Configuration List dialog box for that module.

Each Site Channel Configuration List dialog box displays the configurable PIMs and configured/active PIMs. A configured and active PIM represents an operating link between a Jessica PBX Gateway system and the PIM Controller Board.

Help

Choose the Help button to access the Help function. (Help is also available by pressing the F1 key.)

Configurable Sites:

The Configurable Sites list box displays all inactive unconfigured site- type interface modules. If a PIM appears in this box, no channel configuration exists at the CEC/IMC Manager and no active Controller Board control data link exists at the CEC/IMC for the corresponding site assignment number. Any number of these available PIMs may be selected at one time to be assigned to the Configured/Active Sites list box for configuration.

Configured/Active Sites:

The Configured/Active Sites list box displays PIMs which have been added but not yet channel-configured, PIMs which have had previous channel configurations performed, and PIMs which have been previously channel-configured and have an active Controller Board control data link. Before a PIM can be channel-configured, it must be listed in the Configured/Active Sites list box. Any number of these

3-65