Ericsson LBI-39224 manual DC Controlled Station State Mapping Dialog Box, 171

LBI-39224

Figure 37 DC Controlled Station State Mapping Dialog Box

Help

Choose the Help button to access the Help function. (Help is also available by pressing the F1 key.)

The DC Controlled Station State Table Mapping (low level configuration) dialog box maps to a state table located on the CI Board for the selected channel. This state table is what the CI Board uses to control the base station. DC stations' commands are controlled by applying different current levels on a wire pair to select the required functions.

Programming the state tables configures the CEC/IMC to send the DC control signal that matches the conventional base station configuration for the desired function. It will not be possible to program state tables at the CEC/IMC without knowing the corresponding base station's DC control signal configuration.

The currently selected channel (selected previously in the Conventional Channel Configuration dialog box) is displayed in the read only Channel field with its associated Channel Alias displayed below.

3-171